![]() |
|
|
The Auto Steer was designed by a yachtsman for
a range of yachts and comes in two sizes, the Trim Tab for vessels up to
10.5m (35 ft) and the Servo Pendulum for vessels from 7.5m (25 ft) up to
18.5m (60 ft).
Auto Steer wind vane steering systems are designed to maintain control of the boat’s direction leaving the helmsman free to keep a look out, carry out general repairs, navigate or even sleep. For a boat of average steering characteristics Auto Steer should maintain a course as well as a good helmsman but for much longer and at speeds from 2 knots to maximum hull speed, under all sailing conditions for both offshore and coastal cruising The manufacture utilises modern engineering techniques and all moving parts are virtually frictionless. This allows accurate step less steering at all times. The design and quality of manufacture and materials will ensure that, with the minimum of maintenance, the system will give many years and many thousands of miles of satisfactory operation. |
Auto-Steer is a wind-vane self steering system designed to replace the helmsman under all sailing conditions both offshore and coastal cruising. Auto-Steer is manufactured in Cornwall, UK by Hydra. Auto-Steer will steer your boat and is efficient in all weathers. Autosteer is a self steering product providing wind powered steering for sailing and yachting enthusiasts. Auto-Steer systems are made in our factory situated in Falmouth, Cornwall, UK to the highest standard. Auto-Steer Trim Tab is a new self steering device for yachts up to 35 feet long with transom-hung rudders. Auto Steer is a purpose built system, light strong and stylish. Auto-Steer Trim Tab is suitable for most tiller steered, transom-hung rudder boats of modern design up to 10.5 metres (35ft) overall length. Auto Steer Servo Pendulum unit is for boats between 7.5 metres (25ft) and 18.5 metres (60ft). Sailing enthusiasts in the UK have designed the Auto-Steer range dedicated to keeping sailing the enjoyable sport it should be. If you are looking for an automatic helmsman device the Autosteer range is the perfect choice. Both Trim Tab and Servo Pendulum Auto Steer products can easily be fitted to Transom Hung Rudders , Through Hull Rudders , wheel steering and High Transom. The UK Auto Steer range is noiseless and energy efficient using wind energy meaning greater reliability whilst at sea, less maintenance, less drain on power supply. For Auto Helm systems use the Autosteer range of wind powered products produced in our factory in Falmouth, Cornwall, UK.
welcome hydra, design service, safety standards, service and support, product specifications, welcome hydrock, design service, saftey, service and support, product pdf, welcome hydralock, design and safety, hydralock applications, welcome autosteer, design, safety, costings, user comments and testimonials, autosteer specifications,